Help Manual


Sigma Magic Help Version 15

Hierarchical Clusters Analysis


This analysis can be used to determine a dendrogram that builds the hierarchy from the bottom up. The algorithm works by putting each data point in its cluster or to one of the randomly determined clusters. Then the closest two clusters are identified and then combined into one cluster. The above process is repeated until all the data points are combined into a single cluster. The tree can then be pruned to display which data points belong together within a cluster.

This functionality is provided by the R software using the function hclust from package stats. Note that this functionality requires that RScript software be installed on your computer and linked to the Sigma Magic software within the options menu. Hierarchical Cluster Analysis worksheet can be added to your active workbook by clicking on Analytics and then selecting Cluster Analysis > Hierarchical.


Click on Analysis Setup to open the menu options for this tool. A sample screenshot of the menu is shown below.
menu 1
Algorithm: Specify the agglomeration method to be used.
AutoUses Ward's minimum variance method as the default.
AverageAims for clusters between the single and complete link methods.
CentroidAims for clusters between the single and complete link methods.
CompleteThe complete linkage method finds similar clusters.
McquittyAims for clusters between the single and complete link methods.
MedianAims for clusters between the single and complete link methods.
SingleThe single linkage method adopts a friends of friends clustering strategy.
WardWard's minimum variance method aims at finding compact spherical clusters.
Num Clusters: Specify the number of clusters to display in the final dendrogram.
Distance Metric: Specify the formula used to determine the distance between observations. Available distance measures are:
AutoUses the Euclidean distance as the default metric.
BinaryVectors are regarded as binary bits (non-zero elements are treated as 1, and zero elements are treated as 0).
CanberraIs a numerical measure of the distance between pairs of points and is a weighted version of L1 distance. It can be used for comparing ranked lists.
EuclideanSquare of the distance between two vectors.
ManhattanAbsolute distance between two vectors.
MaximumUses the maximum distance between two components as the metric.
Standardize: This specifies if the input observations should be standardized so that each variable has a similar variance structure.
AutoUses the standardization as the default method.
YesPerforms standardization of data prior to analysis.
NoDoes not perform any standardization of data prior to analysis.
Additional Options: This field is optional. You can specify any additional options for the R software program directly by typing it here.
Help Button: Click on the Help Button to view the help documentation for this tool.
Cancel Button: Click on the Cancel Button to discard your changes and exit this menu.
OK Button: Click on the OK Button to save your changes and try to execute the program. Note that you will need to specify the required data in order to complete the analysis and generate outputs. If there are any missing data, then the software will remind you to specify the data and click on Compute Outputs to generate analysis results.


If you click on the Data button, you will see the following dialog box. Here you can specify the data required for this analysis. Data
Search Data: The available data displays all the columns of data that are available for analysis. You can use the search bar to filter this list and to speed up finding the right data to use for analysis. Enter a few characters in the search field and the software will filter and display the filtered data in the Available Data box.
Available Data: The available data box contains the list of data available for analysis. If your workbook does not have any data in tabular format, this box will display "No Data Found". The information displayed in this box includes the row number, whether the data is Numeric (N) or Text (T), and the name of the column variable. Note that the software displays data from all the tables in the current workbook. Even though data within the same table have unique column names, columns across different tables can have similar names. Hence, it is important that you not only specify the column name but also the table name.
Add or View Data: Click on this button either to add more data into your workbook for analysis or to view more details about the data listed in the available data box. When you click on this button, it opens up the Data Editor dialog box where you can import more data into your workbook, or you can switch from the list view to a table view to see the individual data values for each column.
Required Data: The code for the required data specifies what data can be specified for that box. An example code is N: 2-4. If the code starts with an N, then you will need to select only numeric columns. If the code starts with a T, then you can select both numeric and text columns. The numbers to the right of the colon specify the min-max values. For example, if the min-max values are 2-4, then you need to select a minimum of 2 columns of data and a maximum of 4 columns of data in this box. If the minimum value is 0, then no data is required to be specified for this box.
Select Button: Click on this button to select the data for analysis. Any data you select for the analysis is moved to the right. To select a column, click on the columns in the Available Databox to highlight them and then click on the Select Button. A second method to select the data is to double click on the columns in the list of Available Data. Finally, you can also drag and drop the columns you are interested in by holding down the select columns using your left mouse key and dragging and dropping them in one of the boxes on the right.
Selected Data: If the right amount of data columns has been specified, the list box header will be displayed in the black color. If sufficient data has not been specified, then the list box header will be displayed in the red color. Note that you can double-click on any of the columns in this box to remove them from the box.
View Selection: Click on this button to view the data you have specified for this analysis. The data can be viewed either in the tablular format or you can view a graphical summary of the data selected.


If you click on the Program button, the software will display the program code - an example screenshot is shown in the figure below. Pre-Process Inputs 3
R Program: You can view the R program that will be executed here. This program is usually automatically generated from the options you have specified in the setup earlier. This is the program that will be executed by the R program to generate analysis outputs. If you like, you can edit this program.
Auto Mode: If the radio button is selected as Auto, then the software will automatically update this code based on any changes you make in the input dialog box. We recommend that you use this option to generate the R program so that all your input settings are used to generate analysis results.
Manual Mode: If you use the Manual option, then you will be allowed to edit the R program before the program is executed. Make sure that you specify a syntactically correct program; otherwise, the R program may report errors.


If you click on the Verify button, the software will perform some checks on the data you have entered. A sample screenshot of the data is shown in this figure. Pre-Process Inputs 4
Verify Checks: The objective of this analysis as well as any checks that are performed are listed in this dialog box. For example, the software may check if you have correctly specified the input options and if you have specified the data correctly for analysis.
Check Status: The results of the analysis checks are listed here. If the checks are passed, then they are shown as a green-colored checkmark. If the verification checks fail, then they are shown as a red-colored cross. If the verification checks result in a warning, they are shown in the orange color exclamation mark and finally, any checks that are required to be performed by the user are shown as blue info icons.


Click on Compute Outputs to update the results on the worksheet. A sample screenshot of the worksheet is shown below.
Hierarchical Outputs
Notes Section: The notes section provides a summary of the input data, and the analysis results section shows the call used to analyze the data.
Graph Section: The graph section shows the cluster dendrogram along with the red boxes that highlight the cluster groups. In this example, the rows 4 and 6 are "similar" since they belong to the same cluster, similarly rows 1 and 2 are "similar" and 5 and 7 are "similar".


Here are a few pointers regarding this analysis:
  • This analysis requires that the R software needs to be installed on your computer. Further, you will need to provide a link to the RScript executable file under Sigma Magic Options so that the software can use the R software to generate analysis results.


Following examples can be found in the Examples folder.
  • Determine the hierarchical cluster analysis for the data given in the file. (Hierarchical 1.xlsm)


For more information on this topic, please refer to the following articles. Do note that if any external links are mentioned below, they are for reference purposes only.